Expert Answers about Cup Holder

• What Replacement Cup Holder Do You Recommend that Does Not Narrow at the Bottom?
• The only console-style cup holder that we have that is close to the diameter you are seeking without narrowing at the bottom is the 2-7/8 inch diameter Optronics Drop In Cup Holder # 302B. The Optronics cup holder is designed to drop into your current Optronics Drop In Cup Holder with Handle Rest # 09017101B. However, you will still an open cavity on your current cup holder. Unfortunately, we do not currently have something that can cover that opening. If you are looking for something...
  view full answer...


• How to Remove Cup Holder From Thomas Payne Momentum Furniture
• If you need to remove one of the cup holder assemblies on your Thomas Payne Momentum Recliner you can do so by first locating the notch on the side of the cup holder that you should be able to feel with your hand. Then it's just a matter of using something like a flathead screwdriver to pop up the cup holder using this notch. Once the unit is popped up from its recessed opening there will be 2 screws revealed that need to be removed before you can completely detach the cup holder wiring...
  view full answer...


• Can I Use The Optronics Drop In Cup Holder For A Custom Cup Holder I'm Building
• If the hole is the correct diameter, I do not see why the Optronics Drop In Cup Holder with Handle Rest - 2 Tier - 2-1/2" Tall x 3-5/8" Diameter, part # 09017101B, would have a problem fitting in that hole. It does come with 3 screw holes on the bottom, so you will be able to secure it as well. I have included a video demo link below.
  view full answer...


• Will The Optronics Drop In Cup Holder Fit A 2021 Honda Odyssey?
• We have not had the chance to test the Optronics Drop In Cup Holder with Handle Rest # 09017101B on a 2021 Honda Odyssey, but you can compare the dimensions to your Odyssey's cup holder dimensions to verify fitment. This drop in cup holder has a diameter of 2-3/4" on the lower segment, and 3-5/8" on the upper cup segment. I attached a photo showing these dimensions along with a demonstration video for you to check out.
  view full answer...


• How To Remove Old Cup Holder In 2021 Momentum 320G To Install Replacement Cup Holder 195-387597
• To remove the Replacement Cup Holder # 195-387597 In your 2021 Momentum 320G you need to twist the top ring to remove it, and that will reveal 3 screws to be removed allowing you to completely remove the cup holder and replace it with the new one.
  view full answer...


• How Do You Remove the Cup Holder From a Thomas Payne Sofa?
• To get the cup holder removed, you will need to locate a notch inside the cup holder. You should be able to feel with your hand, but can be a little tedious. Once you find it, you will need to use a flathead screwdriver to pop it up as this will reveal 2 screws that need to be taken out. Once these are removed, you will be able to pull out the old cup holder.
  view full answer...


• Troubleshooting the Replacement Cup Holder for Thomas Payne
• To operate the lights on the Cup Holder for Thomas Payne Momentum Recliners and Sofas # 195-387597 you just use the button found on the outer ring of the cup holder (be sure that it is not locked). If when the lights are off, the system is still lit (other than the small spots on the buttons) you likely have a malfunction and will want to unplug the chair to reset it. If that doesn't solve the issue, then the switch is bad and you will need the Replacement Cup Holder for Thomas Payne Momentum...
  view full answer...


• How to Remove Cupholder From Thomas Payne Momentum Recliner
• If you need to remove one of the cup holder assemblies on your Thomas Payne Momentum Recliner you can do so by first locating the notch on the side of the cup holder that you should be able to feel with your hand. Then it's just a matter of using something like a flathead screwdriver to pop up the cup holder using this notch. Once the unit is popped up from its recessed opening there will be 2 screws revealed that need to be removed before you can completely detach the cup holder wiring...
  view full answer...


• Tow-Rax Cup Holder # TWSP2CH Dimensions
• I went out to the warehouse and pulled the Tow-Rax 2-Cup Drink Holder, part # TWSP2CH, and took some measurements for you, which you can also see on the included image. The thickness of the material is 2.62 mm. The cup holder is 8" long x 4" deep x 2-11/16" tall. The dimensions of the upper back plate is 5-7/8". The cup hole diameter is 3" and the part weighs 2 lbs. I have included a video review of this cup holder for you to check out as well.
  view full answer...


• How To Determine Fit of the Optronics Drop In Cup Holder
• The Optronics Drop In Cup Holder part # 302B is not a vehicle specific component so I would not be able to confirm compatibility. That said, most cup holders are a standard size so you should not have any fitment issues. If you want to confirm then make sure the inner diameter of your existing cup holders measures at least 2-7/8" diameter.
  view full answer...


• Help Finding Notch to Remove Thomas Payne Cupholder
• I spoke with my contact at Lippert who said that there is a notch in the side of the cup holder that you should be able to feel with your hand. I attached a picture of where it is as well. Once you find it you will need to use a flathead screwdriver or a butter knife to pop it up. This will reveal 2 screws that you will need to take out before detaching the cup holder wiring from the arm. She also said that when the massage function goes out this is typically something that is related...
  view full answer...


• Can Yeti 32 Oz Cup Fit In Thule Cargo and Drink Holder # TH20201514
• I went out to our warehouse with a 32 oz Yeti cup I borrowed from a co-worker so I could take a look at the Thule Cargo and Drink Holder # TH20201514 referenced in your question. I did find that the cup fit perfectly and had a nice snug fit inside the cup holders. The entire bottom (narrow) portion of the cup fits without issue. This console will allow you to add two cup holders along with extra storage space to your Thule Chariot 2-Child Carrier. IT also fits the Cross, Lite, Cheetah...
  view full answer...


• Is the Camco Adjustable Drink Holder Available in Different Colors?
• There are two different colors available for the Camco Adjustable Drink Holder; brown # CAM44043 and black # CAM44044. Each of the holders features adjusting arms that allow it to fit a range of different size cups. I've added links to a pair of video reviews on the holder for you to take a look at.
  view full answer...


• How to Remove Cup Holder from Thomas Payne Momentum RV Dual Reclining Sofa
• I spoke with my contact at Lippert who said that there is a notch in the side of the cup holder that you should be able to feel with your hand. Once you find it you will need to use a flathead screwdriver or a butter knife to pop it up. This will reveal 2 screws that you will need to take out before detaching the cup holder wiring from the arm. She also said that when the massage function goes out this is typically something that is related to the control box. This is found under the chair...
  view full answer...


• Are The JR Products Adjustable Cup Holders UV Resistant?
• The JR Products Adjustable Cup Holder # 37245623 is made of an ABS plastic. ABS is not necessarily known for its UV resistance. That said, we have found that these cup holders are perfectly acceptable for outdoor use. The plastic is sturdy, it will hold up to impact and repeated opening and closing. It even works nicely with the heavier steel cups that seem to be so popular these days. The plastic can become sun-faded over time though, especially if you have it installed in a location...
  view full answer...


• Replacement Cup Holder for a Thomas Payne Double Recliner
• The Replacement Cup Holder for Thomas Payne Momentum Recliners # 195-387597 will work for the Momentum series recliners (#'s 195-000055, 195-000056, 195-000055-056, 195-055-056-058, and 195-055-056-057) if you have one of those models then this will work for you. But it sounds like you have a double recliner with power recline which the # 195-387597 does not have. The Momentum series has release handles between the seat cushion and arm of the recliners to activate the footrests. The Replacement...
  view full answer...


• Thomas Payne Seismic Recliner Won't Open or Close and Just Clicks
• The easiest way to rule out a faulty cup holder on the Thomas Payne Seismic Recliner is to simply switch the cup holder from one side to the other. If the issue doesn't carryover you know that's not the problem and it's likely the control box. If it is the cup holder you'll have to reach out to Lippert for replacement as we don't carry them for the Seismic but we do offer the control box, Replacement Power Control Box for Thomas Payne Seismic Recliners and Sofas part # LC36FR.
  view full answer...


• Thomas Payne Cup Holder Sensitivity
• The Cup Holder for Thomas Payne Momentum Recliners and Sofas - Qty 1 Item # 195-387597 were designed to be extra sensitive so that you can easily use them by just gliding your finger over them and there unfortunately is no way to turn the sensitivity on them down.
  view full answer...


• Can The Plastic Trim Piece For The Optronics Drop In Cup Holder Be Purchased Separately
• The plastic trim cover for the Optronics Drop In Cup Holder with Handle Rest - 2 Tier - 2-1/2" Tall x 3-5/8" Diameter Item # 09017101B is not sold separately. You would have to replace the whole thing.
  view full answer...


• What Is The Cup Holder Width of the Optronics Foldable Cup Holder
• The cupholder portion of the Optronics # 2409171B is adjustable between roughty 2-1/2" and 3-3/4" so this would be a good fit for you if you're referring to the beverage holder dimensions. The casing dimensions on this cup holder are roughly 3-3/4" x 3-7/8". I've linked the review video of this part where it details the different dimensions on the cupholder and case for you to see exactly how we measured.
  view full answer...